Using grub to boot an encrypted system often leads to long waits while grub decrypts the luks container just to get to the kernels.
This load time is a weakness of the current grub implementation - and while it will probably be solved in due time - we need to find ways around it.
For example you can use a separate partition for boot, $esp and root and leave boot unencrypted. This works and grub will happily boot. If you want to dual boot several variations of Linux and throw in a Windows and a couple of ISO - this is the way to go.
But what if you requirements are simple? You just want an encrypted Manjaro? And you want the installation to be as simple as possible?
systemd-boot is a bootloader which do not get much attention on Manjaro - since most Manjaro installations is created using Calamares installer which in turn installs grub. I recall a setting for an iso-profile setting the
efi_bootloader="grub" - but it didn't work very well so I decided to learn how to implement systemd-boot the most simple way - later create a merge request to the tools.
First - I am assuming you know your device path - for the safety of less experienced readers - I am using a device path /dev/sdy you most likely do not find on your system.
Second - I am assuming you are using a root TTY as no commands is prefixed with sudo.
TIP: Don't use a graphical environment - switch to TTY - because the live system may lock screen and other unpleasant thing while you are using the terminal - thus breaking what ever you were doing.
Third - I will be using command line partitioning - no menu interfaces - pure command line.
Fourth - This guide will work for any device - it be internal, removable USB or otherwise attached to your system. To ease the pain of writing the same device over and over I made use of an environment variable - I assume you set the same too.
TIP If your circumstances allows for it - you can use ssh to install remotely using another device on your network.
If you have not done so already open a root TTY and set the device variable - remember it only exist in the current shell
Ensure your device is not mounted anywhere
# umount -f "$INS"
The stuff that needs disclaimers - you are on your own kind of stuff.
# sgdisk --zap-all "$INS"
# sgdisk --mbrtogpt "$INS"
# sgdisk --new 1::+512M --typecode 1:ef00 --change-name 1:"EFI System" "$INS"
# sgdisk --new 2::: --typecode 2:8304 --change-name 2:"Linux x86-64 root" "$INS"
# wipefs -af "$INS"1 # wipefs -af "$INS"2
Format $esp partition using FAT32
# mkfs.vfat -vF32 "$INS"1
Create the LUKS container - the
--iter-time argument can be changed - the more iterations the better.
# cryptsetup -v --iter-time 5000 --type luks2 --hash sha512 --use-random luksFormat "$INS"2
Open the LUKS container
# cryptsetup open "$INS"2 cryptroot
Format the container using your preferred file system - If your device is flash based you can use f2fs which is created for flash or you can use ext4 which is a defacto standard for Linux.
# mkfs.f2fs /dev/mapper/cryptroot
Mount your LUKS container on the systems temporary mountpoint
# mount /dev/mapper/cryptroot /mnt
Then create the folder for booting systemd ($esp)
# mkdir /mnt/boot
And mount the $esp partition
# mount "$INS"1 /mnt/boot
This article is only scratching the surface of the new system. We only install a basic bootable system using the base meta package, filesystem tools for f2fs along with kernel and some required tools - and don't forget network connectivity
# basestrap /mnt base f2fs-tools linux55 nano mkinitcpio bash-completion networkmanager
Configuring the system is the tedious - extremely boring - but crucial part, usually abstracted by tools like Manjaro Architect.
# manjaro-chroot /mnt /bin/bash
The vconsole.conf file contains information about the type of keymap you are using - in this case a danish keymap - but it could us for a default US english keymap.
# echo KEYMAP=dk > /etc/vconsole.conf
The hostname file contains the name of your computer on a network - this must be unique - you can of course select another name
# echo manjaro > /etc/hostname
The hosts file contains information local to your system. The is almost empty - edit the file and append below IP addresses and the hostname from your hostname file
# nano /etc/hosts
127.0.0.1 localhost 127.0.1.1 manjaro.localdomain manjaro
The ever important system time - the example is for Denmark but it could be Europe/Paris if you live in that area.
# ln -sf /usr/share/zoneinfo/Europe/Copenhagen
Unix systems expects the hardware clock to run in UTC and the system then corrects the clock using the timezone information - this is a point where Windows and Linux disagree causing trouble for dual-booters - which we are not.
# hwclock --systohc
Enable the network and timesync (don't use
--now in chroot, it will fail)
# systemctl enable NetworkManager systemd-timesyncd
Now we create a locale configuration - this configuration defines system messages and how time, date and other units are displayed.
# nano /etc/locale.gen
Uncomment the locales you want to use - e.g. using English for messages and German for date and time uncomment both. In this example - again for Denmark.
To actually use preferences the necessary files needs generated - this is done using the
The locale.conf file contains a reference to the locale files just created. Please see the Arch Wiki page on locales for additional entries you can add.
# echo LANG=en_DK.UTF-8 > /etc/locale.conf
And finally set the root password
This is the interesting part you have worked yourself down to. Because we are using LUKS encrypted root partition we need to make some system parts available at boot time.
We need to make the initramfs aware of the encryption we use and it need to accept input from the user on encryption phrase used to decrypt the system.
Those settings is defined in the file mkinitcpio.conf - we need to edit that file so suit our purpose
# nano /etc/mkinitcpio.conf
Edit the HOOKS line to include keyboard, keymap, sd-vconsole and sd-encrypt. This is required to get past the decryption phase. And the order of appearance is important - they must appear before autodetect.
HOOKS="systemd keyboard keymap sd-vconsole block sd-encrypt autodetect modconf filesystems fsck"
Use the mkinicpio command to generate the initramfs - it will copy the files to the boot ($esp) partition.
# mkinitcpio -P
Now install the systemd bootloader to the boot ($esp) partition
# bootctl --path=/boot install
To get the UUID for the device we need to exit chroot and the rest of the configuration can be done outside.
For the bootloader to actually load we need create a configuration file to specify the kernel, initrd and kernel options.
The configuration must match your system's kernel and initrd also DEVICE-UUID must the UUID of the physical device hosting the LUKS container. We can use
lsblk to output the UUID and write it directly to the entry configuration.
# lsblk -no PATH,UUID "$INS"2 > /mnt/boot/loader/entries/manjaro.conf
We also need the filenames of the kernel and to avoid typos - we use
ls and pipe the output to the same file - just appending instead
# ls /mnt/boot/init* /mnt/boot/vmlinuz* >> /mnt/boot/loader/entries/manjaro.conf
Now open the file using nano
# nano /mnt/boot/loader/entries/manjaro.conf
Amend the file to look like this (the order of the lines are not important)
title Manjaro linux /vmlinuz-5.5-x86_64 initrd /initramfs-5.5-x86_64.img options root=/dev/mapper/cryptroot rd.luks.name=DEVICE-UUID=cryptroot
This new configuration file is then added to the file loader.conf
# nano /mnt/boot/loader/loader.conf
This article does not take into account the amd/intel microcode and maintenance due to kernel upgrades or booting different kernels.
To learn more - read up on systemd-boot on the Arch Wiki.
To facilitate tedious maintenance tasks you can install the systemd-boot-manager package from official repo.
Just a few things worth noting.
- With systemd-boot, we also need to handle microcode loading by hand in the entries
- It is probably worth pointing out that these entries will need to be added/updated as new kernels are installed and removed
- Lastly, systemd-boot-manager will handle both those things for you in an automated fashion. It can automate the installation of systemd-boot, the creation and removal of entries, the addition of microcode updates and has options setting defaults automatically. It has full support for luks/lvm/btrfs/zfs/etc. -- @dalto
Unmount your devices
# umount -R /mnt
Close the LUKS container
# cryptsetup close /dev/mapper/cryptroot
If you are installing to an USB device - sync device before removing it
You now have a the minimal for a system to boot and make a network connection - where you go from here is really up to you.
Pick from the big-big box of Linux Lego and customize your own favorite system.
Fetch the package list for your favorite Manjaro Desktop and feed it to pacman.
cut -d' ' -f1 <<<$(curl -L https://osdn.net/projects/manjaro/storage/xfce/20.0.1/manjaro-xfce-20.0.1-200511-linux56-pkgs.txt) > packages.txt
Feed the list of packages to pacman
sudo pacman -Syu --needed - <packages.txt
You must manually enable the necessary services - e.g. the display manager or bluetooth, cups, firewall, timesync etc.
For Xfce these services is a good start:
sudo systemctl enable lightdm bluetooth org.cups.cupsd ufw systemd-timesyncd
You have only scratched the surface and there is work to be done - installing Xorg, applications, themes - what ever you fancy - it's really up to you how this adventure ends.
Have fun - I did.